3
Safety Information (continued)
CAUTION: Know the pump and its applications,
limitations, and potential hazards.
CAUTION: Follow all local electrical and safety
codes, along with the National Electrical Code
(NEC). In addition, all Occupational Safety and
Health Administration (OSHA) guidelines must be
followed.
IMPORTANT: The motor of this pump has a thermal
protector that will trip if the motor becomes too hot.
The protector will reset itself once the motor cools
down and an acceptable temperature has been
reached. The pump may start run expectedly if it is
plugged in.
IMPORTANT: Ensure the electrical power source is
adequate for the requirements of the pump.
IMPORTANT: Before using the pump, check the
tubing for holes or excess wear, which could cause
leaks, and ensure the tubing is not kinked or making
sharp angles. Straight tubing allows the pump to
move the greatest amount of water quickly, and also
check that all tubing connections are tight to minimize
leaks.
IMPORTANT: This pump is made of high-strength,
corrosion-resistant materials. It will provide
trouble-free service for a long time when properly
installed, maintained, and used. Please carefully read
the manual and follow the instructions regarding
common pump problems and remedies.
IMPORTANT:
This pump is fully automatic in
operation. The float switch controls the pump’s “ON”
and “OFF”.
Pre-Operation
APPLICATION
This non-submersible utility pump is designed for condensate removal applications. Pump water only with this pump.
This pump has not been tested or approved for use in swimming pools or in salt-water marine areas. This pump is not
designed to function as a permanently installed sump pump. It is also not engineered to run continuously as a “fountain”
or “waterfall” pump.
Do not use where water recirculates.
Not designed for the drains of swimming pools.
FEATURES
Operating water depth: minimum, 2-1/4 in.
PACKAGE CONTENTS
Part
Description
A
Pump
B
3/8 in.(ID)clear tubing
