background image

 

Instruction Manual of deep-well pumps of type: 

3SDm, 3SD, 3ti, 3t2i, 3SKm, 4SKm, 4SCR, 4SD, 4SDm,

 

3.5”SCM, 3.5”SCR, 90MSC, 3”SQIBO, STING, DWP, 3”SCR, 4”ISP,

 

6”ISP, 

4”ISPm, 4”SCR, OLA, 2,5”STm, 3STm 

reading 

the 

instruction 

manual is obligatory

 

 

device damage hazard

 

electrocution hazard

 

 

NOTE:  read  the  manual  prior  to

 

commencement  of  use.  For  safety 

reasons, the pump can only be operated

 

by persons well-familiarised. 

NOTE: the manual is a primary part of the purchase and sale contract. The user’s 

failure  to  observe

 

the  instructions  included  in  the  manual  is  a  breach  of  the 

contract  and  excludes  any  complaints  arising  from  potential  device  failure 
caused by the use that is inconsistent with instructions of its use. 

NOTE:  failure  to  observe  the  instructions  included  in  the  manual

 

can 

result  in  hazard  for  persons,  properties  in  which  they  are  installed, 
environment and

 

the pump itself. 

CAUTION! This equipment is not intended for use by persons (including children) with 

reduced  motor,  sensory  or  mental  capacities,  or  persons  without  experience  or  not 

familiarised with the equipment, unless it is performed under supervision 

or according to the instruction regarding operation provided by persons responsible for their 

 

safety. 

Attention should be paid so that children do not play with the equipment. 

APPLICATION: 

The pumps referred to in the manual are intended for pumping clean water from bored deep 
water intakes or increasing pressure in water systems with the enclosure of the aggregate in a 
hermetic jacket. 
They  can  be  used  in  households  as  water  supply,  means  of  irrigation,  in  heat  pump 
installations, and to feed water into industrial installations. The pumped water cannot contain 
any mechanical contamination. 

 

 

 

 

 

 

 

The  pump  is  intended  for  pumping  of  clean  water,  with  no  solid-  abrasive  particles. 
Pumping  water  containing  sand  results  in  fast  wear  and  tear  of  the  pump  and,  in 
consequence, it its failure. In such a case, only paid repair is available. The above not 
refers to the pumps with increased resistance to sand. 

Summary of Contents for 3SDm









Reviews: