IBM YhinkPad T460, Hardware Maintenance Manual

Page: 74 / 108

Applying labels to the base cover assembly:
The new base cover assembly is shipped with a kit containing labels of several kinds. Apply those labels
when you replace the base cover assembly. For the labels that are not shipped with the new base cover
assembly, peel them from the old base cover assembly, and adhere them to the new one.
The following illustration shows the location of each label.
1
GEO label
13
Israel Bluetooth label
2
S/N label
14
Israel 3G label
3
NFC FCC label
15
Asset tag
4
Taiwan WANN label
16
Swiss SIM ICCID label
5
South Africa ICASA label
17
Indonesia rating label
6
Brazil Anatel label
18
BIS label
7
Mylaysia SIRIM label
19
Information label
8
Indonesia Postel label 20
KCC safety label
9
China WWAN/modem label
21
CECP label
10
Certificate of authenticity label
22
China GEO label
11
Genuine Microsoft label
23
IMEI label
12
Israel WLAN label
1050 Hard disk drive or solid-state drive
Note: Before you start the servicing, disable the internal battery pack. See “Disabling the internal battery
pack” on page 62.
For access, remove these FRUs in order:
•
“1010 SIM card and SIM-card tray” on page 62
• “1020 External battery pack” on page 62
• “1040 Base cover assembly” on page 66
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
68
Hardware Maintenance Manual