IBM x3850 X5 7145 Installation And User Manual Download Page 88

Page: 88 / 102

To locate and install a newer version of IBM Systems Director, complete the
following steps:

1. Check for the latest version of IBM Systems Director:

a. Go to http://www.ibm.com/systems/management/director/downloads.html.

b. If a newer version of IBM Systems Director than what comes with the server

is shown in the drop-down list, follow the instructions on the Web page to
download the latest version.

2. Install the IBM Systems Director program.

If your management server is connected to the Internet, to locate and install
updates and interim fixes, complete the following steps:

1. Make sure that you have run the Discovery and Inventory collection tasks.

2. On the Welcome page of the IBM Systems Director Web interface, click

View

updates

3. Click

Check for updates

. The available updates are displayed in a table.

4. Select the updates that you want to install, and click

Install

to start the

installation wizard.

If your management server is not connected to the Internet, to locate and install
updates and interim fixes, complete the following steps:

1. Make sure that you have run the Discovery and Inventory collection tasks.

2. On a system that is connected to the Internet, go to http://www.ibm.com/

eserver/support/fixes/fixcentral/.

3. From the

Product family

list, select

IBM Systems Director

4. From the

Product

list, select

IBM Systems Director

5. From the

Installed version

list, select the latest version, and click

Continue

6. Download the available updates.

7. Copy the downloaded files to the management server.

8. On the management server, on the Welcome page of the IBM Systems

Director Web interface, click the

Manage

tab, and click

Update Manager

9. Click

Import updates

and specify the location of the downloaded files that you

copied to the management server.

10. Return to the Welcome page of the Web interface, and click

View updates

11. Select the updates that you want to install, and click

Install

to start the

installation wizard.

IBM System x3850 X5 and x3950 X5 Types 7145 and 7146: Installation and User’s Guide

Summary of Contents for x3850 X5 7145







































































































Search results

Summary of Contents for x3850 X5 7145

Reviews:

Related manuals for x3850 X5 7145

Brands by name

Popular brands

IBM x3850 X5 7145, Installation And User Manual

Search results

Summary of Contents for x3850 X5 7145

Reviews:

Related manuals for x3850 X5 7145

Brands by name

Popular brands