IBM Ultrium Internal Tape Drive T200, Reference Manual

Page: 16 / 126

Designed to perform unattended backups as well as to retrieve and archive files,
the Ultrium Internal Tape Drives feature:
v
Native storage capacity of 100 GB per cartridge (200 GB at 2:1 compression) 1
v
Native sustained data transfer rate of 15 MB per second (30 MB at 2:1
compression)
2
v
RS-422 interface for enhanced performance in automated tape libraries.
The Ultrium Internal Tape Drive Model T200 uses an Ultra2 SCSI Low Voltage
Differential/Single Ended (LVD/SE) interface. It features a burst data transfer rate of
80 MB per second.
The Ultrium Internal Tape Drive Model T200F uses a Fibre Channel interface with a
SC-Duplex, multimode optical connector and SCSI protocol. It features a burst data
transfer rate of 100 MB per second and can attach to Storage Area Network (SAN)
components.
The 3580 Ultrium Tape Drive is available in two models. The models vary according
to the type of SCSI interface that each uses to communicate with the server:
v
Model L11 uses the Ultra2, Low Voltage Differential/Single Ended (LVD/SE)
interface. It has a burst data transfer rate of 80 MB per second.
v
Model H11 uses the Ultra, High Voltage Differential (HVD) interface. It has a
burst data transfer rate of 40 MB per second.
1. 1 GB = one gigabyte or 1 000 000 000 bytes
2. 1 MB = one megabyte or 1 000 000 bytes
2
Ultrium Internal Tape Drive and 3580 Ultrium Tape Drive: SCSI Reference
|
|
|
|
|
|
|