United Kingdom Notice
This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to
prevent interference to the reception of radio and television broadcasts.
United States Federal Communications Commission (FCC) Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. IBM® is not responsible for any radio or television interference
caused by using other than recommended cables and connectors, or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device might not cause harmful interference, and (2) this
device must accept any interference received, including interference that might cause undesired operation.
Responsible Party:
International Business Machines Corporation
New Orchard Road
Armonk, NY 10504
Contact for FCC compliance information only: [email protected]
Safety and environmental notices
When this product is used, observe the danger, caution, and attention notices that are contained in this guide. The notices are accompanied by symbols that represent the
severity of the safety condition.
Most danger or caution notices contain a reference number (Dxxxx or Cxxxx). Use the reference number to check the translation in the IBM Systems Safety Information
(G229-9054) publication included in your ship group.
The sections that follow define each type of safety notice and give examples.
Observe the safety notices when using this product. These safety notices contain danger and caution notices. These notices are sometimes accompanied by
symbols that represent the severity of the safety condition.
Possible safety hazards
Class I laser product
Tape storage equipment must be gradually acclimated to the surrounding environment to prevent condensation.
Performing the safety inspection procedure
For your safety, IBM provides a power cord with a grounded attachment plug to use with this IBM product. To avoid electrical shock, always use the power cord and
plug with a properly grounded outlet.
Safety notices
Observe the safety notices when using this product. These safety notices contain danger and caution notices. These notices are sometimes accompanied by symbols that
represent the severity of the safety condition.
Most danger or caution notices contain a reference number (Dxxx or Cxxx). Use the reference number to check the translation in the IBM® Systems Safety Notices, G229-
9054 manual. This manual is on the publications CD-ROM that is shipped with the product.
The sections that follow define each type of safety notice and give examples.
IBM TS22xx - TS2290, TS2280, and TS2270
69
