
Proper acclimation and environmental conditions
Acclimate a tape cartridge to the operating environment before you use it.
Before you use a tape cartridge, acclimate it to the operating environment for 24 hours or the time necessary to prevent condensation in the drive. The time
varies, depending on the environmental extremes to which the cartridge was exposed.
Ensure that all surfaces of a cartridge are dry before it is inserted.
Do not expose the cartridge to moisture or direct sunlight.
Do not expose recorded or blank cartridges to stray magnetic fields of greater than 100 oersteds (for example, terminals, motors, video equipment, X-ray
equipment, or fields that exist near high-current cables or power supplies). Such exposure causes the loss of recorded data or makes the blank cartridge
unusable.
Maintain the conditions that are described in
Environmental and shipping specifications for tape cartridges
Completing a thorough inspection
Complete a thorough inspection of your tape cartridge before you use it.
After a cartridge is purchased and before it is used, complete the following steps:
Inspect the cartridge 's packaging to determine potential rough handling.
When a cartridge is inspected, open only the cartridge door. Do not open any other part of the cartridge case. The upper and lower parts of the case are held
together with screws; separating them destroys the usefulness of the cartridge.
Inspect the cartridge for damage before it is used or stored.
Inspect the rear of the cartridge (the part that loads first into the tape load compartment) and ensure that there are no gaps in the seam of the cartridge case
(see 1 in
). If there are gaps in the seam (see
), the leader pin might be dislodged. Go to
Repositioning or reattaching a
Figure 1. Checking for gaps in the seams of a cartridge
Check that the leader pin is properly seated (see 2 in
).
If you suspect that the cartridge was mishandled but it appears usable, copy any data onto a good cartridge immediately for possible data recovery. Discard
the mishandled cartridge.
Review handling and shipping procedures.
Handling the cartridge carefully
IBM TS22xx Tape Drives
37
Summary of Contents for TS22 Series
Page 1: ...IBM TS22xx Tape Drives IBM...