IBM TransNote, Hardware Maintenance Manual

Page: 25 / 150

Related service information
This section provides information about the following:
v
“Service Web site”
v
“Using Recovery CD”
v
“Passwords” on page 22
v
“Power management” on page 24
Service Web site
When the latest maintenance diskette and the system
program service diskette are available, a notice will be
posted on
http://www.pc.ibm.com/partner/infotips/
Using Recovery CD
To create Service Partition and install the preloaded
system from Recovery CD, do the following;
To create Service Partition [SP]:
1. Erase all partitions on the hard-disk drive using FDISK
or similar application.
2. Boot with Recovery CD (and boot diskette if required).
3. A menu will appear stating “Your computer originally
included a Product Recovery program ... Reinstall
the Product Recovery Program? (Y/N) [ ]”.
Note: If the hard-disk drive contains any partitions, you
will not receive this menu — go to step 1.
4. Enter “Y” and Service Partition will be created and
loaded with D2D files.
Note: If you do not want to create Service Partition,
press “N”, and then go to step 8.
5. Press “ENTER” at next window to continue.
v
Service Partition will be created. System will
automatically reboot during this precess.
v
Recovery process will copy some files to the Service
Partition, PKUNZIP others.
v
Follow prompts — you may be prompted to change
CDs.
v
System will reboot when complete, continue to step
6 to install preloaded system.
Install preloaded system from CD:
6. Boot with Recovery CD (and boot diskette if required)
7. If the hard-disk drive is blank, a menu will appear
stating “Your computer originally included a
Product Recovery program ... Reinstall the
Product Recovery Program? (Y/N) [ ]”.
v
To install Service Partition, go to step 4.
v
To preload hard-disk drive without installing Service
Partition, press “N”.
Related service information
General descriptions
21