IBM TotalStorage Ultrium 3580 H23, Setup And Operator Manual

Page: 46 / 149

Setting the Write-Protect Switch
The position of the write-protect switch on the tape cartridge (see
1
in Figure 9)
determines whether you can write to the tape:
v
If the switch is set to (solid red), data cannot be written to the tape.
v
If the switch is set to unlocked (black void), data can be written to the tape.
If possible, use your server’s application software to write-protect your cartridges
(rather than manually setting the write-protect switch). This allows the server’s
software to identify a cartridge that no longer contains current data and is eligible
to become a scratch (blank) data cartridge. Do not write-protect scratch (blank)
cartridges; the tape drive will not be able to write new data to them.
If you must manually set the write-protect switch, slide it left or right to the
desired position.
Handling the Cartridges
Attention: Do not insert a damaged tape cartridge into your
3580 Ultrium 2 Tape Drive. A damaged cartridge can interfere
with the reliability of a drive and may void the warranties of the
drive and the cartridge. Before inserting a tape cartridge, inspect
the cartridge case, cartridge door, and write-protect switch for
breaks.
Incorrect handling or an incorrect environment can damage the IBM LTO Ultrium
Tape Cartridges or their magnetic tape. To avoid damage to your tape cartridges
and to ensure the continued high reliability of your IBM LTO Ultrium Tape Drives,
use the following guidelines:
Provide Training
v
Post procedures that describe proper media handling in places where people
gather.
A67E0026
1
Figure 9. Setting the write-protect switch
30
IBM 3580 Ultrium Tape Drive Setup and Operator Guide