IBM TotalStorage SAN Volume Controller, Installation Manual

Page: 93 / 123

Use the Left and Right buttons to navigate through the secondary fields that are
associated with some of the main fields.
Note: Sometimes a message might not display fully on the screen. You might see
a right angle bracket (>) in the right hand side of the display screen. If you
see a right angle bracket, press the
right
arrow button to scroll through the
display. This action displays the rest of the text. Press
left
arrow button to
scroll back. When there is no more text to display, you can move to the next
item in the menu by pressing the
right
arrow button.
There are five main options available:
v Cluster
v Node
v Ethernet
v FC port–1 through 4
v
Select language
Related concepts
“Cluster options” on page 64
The main cluster option from the menu can display the cluster name, IP
address, or it may be blank.
“Node options” on page 65
The node option displays the identification number or name of the SAN Volume
Controller.
Related reference
“Ethernet option” on page 68
The Ethernet option displays the operational states of the Ethernet port.
“Fibre channel port-1 through 4 option” on page 68
The FC port-1 through 4 options display the operational status of the fibre
channel ports.
“Select language? option” on page 69
The language displayed can be changed from the menu.
Cluster Status IP address Subnet mask
Gatewa y
Recover cluster?
Node
Status Create cluster?
Ethernet
FC Port-1 FC Port-2 FC Port-3 FC Port-4
Select Language?
Main Options Secondar y Options
Figure 39. Menu options sequence
Chapter 4. Using the front panel display on the SAN Volume Controller
63