IBM TotalStorage L10, Cli Reference Manual

Page: 32 / 96

2006 Model L10 Storage Switch
20
Port configuration menu (root/config/port)
The Port configuration menu provides commands to configure the port settings.
Menu commands
Beaconing ports (root/config/port/beacon)
This command flashes (beacons) a port’s LEDs to indicate the port needs attention. This
feature is typically used when troubleshooting port problems.
To view the current port beaconing settings:
From the Port Configuration menu (root/config/port), type
beacon
and press E
NTER
.
To beacon a port:
From the Port Configuration menu (root/config/port), type
beacon <port number> 1
and press E
NTER
.
Note: Multiple, consecutive ports can be specified by using a dash (-). For example, to
beacon ports 3, 4, and 5, type
beacon 3-5 1
.
To stop beaconing a port:
From the Port Configuration menu (root/config/port), type
beacon <port number> 2
and press E
NTER
.
Table 13. Port configuration menu commands
Command Description
Additional
Information
1. beacon Beacons a port. See page 20.
2. show Displays a port’s configuration. See page 21.
3. types Displays a port’s Smart Setting. See page 24.
4. view Displays the attributes for a Smart Setting. See page 26.
5. add Creates a custom Smart Setting. See page 31.
6. edit Edits a custom Smart Setting. See page 31.
7. del Deletes a custom Smart Setting. See page 31.
8. type Selects a Smart Setting. See page 32.
9. .. Returns to the previous menu. See page 10.
10. ? Displays additional information on a command. See page 10.