IBM TotalStorage L10, Cli Reference Manual

Page: 38 / 96

2006 Model L10 Storage Switch
26
Before selecting a cascade option, consider the following:
• Cascade ports of like number should be connected together. For example, connect
port 1 of Switch A to port 1 of Switch B.
• Cascade port numbers must be lower than non-cascade port numbers (for example,
Initiator or Target ports). Therefore, select cascade types before selecting these non-
cascade types.
• A maximum of two switches may be connected using string cascades.
IBM Smart Setting
This Smart Setting is a custom setting defined by IBM.
IBM Linux Initiator
This Smart Setting is a custom setting defined by IBM that has the Port Test Before
Insert (PTBI) policy disabled.
IBM Linux Stealth Initiator
This Smart Setting is a custom setting defined by IBM that has the Port Test Before
Insert (PTBI) policy disabled, and the Stealth Intelligent Change Manager feature is
enabled and set to “Only Receive Changes”.
Displaying Smart Setting attributes (root/config/port/view)
This command displays the attributes for a specific Smart Setting. See “Displaying
Smart Settings (root/config/port/types)” on page 24 for a list of port type numbers.
To view the Smart Setting attributes:
From the Port Configuration menu (root/config/port), type
view <port type
number>
and press E
NTER
.
The Smart Setting attributes include.