IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 278 / 605

Take action
Confirms and activates a request to move volumes to the selected category.
Cancel
Closes the Manage Import Volumes window without saving any of the
changes.
Volser ranges
Opens the Volser Ranges window (see Figure 142 on page 238).
Refresh
Refreshes the Manage Import Volumes window.
Help
Provides help about the Manage Import Volumes window.
Note:
Only 50 physical volumes are displayed. If more than 50 Import volumes
exist, then –More– is displayed at the bottom of the list box.
Manage Insert Volumes
The Manage Insert Volumes window (Figure 152) allows you to reevaluate the
physical volumes in the Insert category for native tape drive use. By redefining the
volser ranges, you can move the volumes to the Insert categories for the VTS or
TS7700 Virtualization Engines. You can also eject the volumes from the 3494 Tape
Library.
The Manage Insert Volumes window has the following push buttons:
Select all
Selects all volumes within the current list box.
De-select all
Deselects all volumes within the current list box.
Figure 152. Manage Insert Volumes Window
252
3494 Tape Library Operator Guide