IBM TOKEN-RING PCI FAMILY ADAPTER, Manual

Page: 53 / 113

¹
If you are installing from a diskette that you built from the CD-ROM or
from the Web, insert the diskette and make sure that the Floppy disk
drives checkbox is checked.
4
Select Next to continue. Windows should find an updated device driver on
the diskette or the CD-ROM. Make sure that The updated driver is selected
on the page and select Next.
5
The next page of the wizard should confirm that the hardware and device
driver are found. Select Next again to begin copying files.
Windows might prompt you for the driver diskette. Type the letter of your
drive.
Windows might also prompt your for the Windows 98 CD-ROM in order to
install its default network protocols. Make sure that the location of your
Windows 98 installation files (for example, D:\ or D:\WIN98 or
C:\WINDOWS\CATROOT) appears in the entry and select OK.
6
The wizard should report after the files have finished copying that
Windows has finished installing the software that your new hardware
device requires.
Select Finish to continue.
7
A dialog box will display the following message:
To finish setting up your new hardware, you must restart your
computer. Do you want to restart your computer now?
Remove the diskette or CD-ROM from your computer and select Yes.
8
Installation is now complete.
Check for the following conditions to determine whether the adapter is
working correctly and whether installation has been completed successfully:
¹
The device driver files loaded successfully.
¹
The Device Manager (System control panel applet) reports that the
device is working correctly.
¹
The adapter LEDs indicate normal operation: green ON, amber OFF.
If you experience problems, go to Chapter 4, “Problem Solving.”
Chapter 3. Software Installation
3-31