IBM Tivoli and Cisco, User Manual

Page: 203 / 516

Chapter 6. Compliance subsystem implementation
185
Now we must change the parameters for the new collector instance.
Right-click the Messenger Service Disabled collector instance and click Edit
collector parameters from the pop-up menu. The parameters were
described in Table 6-7 on page 177. Provide the following parameter values:
– SERVICE_REQ equal to Messenger
– REQ_RUNNING not set
– SERVICE_RUNNING_WF not set
– REQ_DISABLED equal to 1
– SERVICE_DISABLED_WF equal to TCRMessengerDisabled
When you are done editing click Save.
3. As a final step save the changes you made to all of the collectors. If there are
any changes that have not yet been saved the Save Collector List button on
the right side of the window is active, as shown in Figure 6-53. Click this
button.
Figure 6-53 Saving changes made to the policy collectors