IBM THINKPAD L460, Hardware Maintenance Manual

Page: 71 / 116

Removal steps of the keyboard
Note: Depending on the computer model, your computer might look different from the illustrations in
this topic.
Use the flat end of the keyboard multi-tool to slide the keyboard frame forward by 2.5 mm (0.1 inch). The
screw heads beneath the keyboard frame are exposed.
Note: Do not press or hold the keys while sliding the keyboard frame. Otherwise, the keyboard frame
cannot be moved.
1
Use the cross end of the keyboard multi-tool to loosen the screws.
2
Pivot the keyboard slightly upward as shown by the arrow 3 until you can see the connectors on the bottom
side of the keyboard. Then turn over the keyboard as shown by the arrow 4 .
Chapter 9
.
Removing or replacing a FRU
65