![background image](http://html2.mh-extra.com/html/ibm/thinkpad-i-1200/thinkpad-i-1200_hardware-maintenance-manual_3282312032.webp)
Turn an additional
90 degrees
after the screw head
touches the surface of the plastic part:
v
Logic card to plastic
Turn an additional
180 degrees
after the screw head
touches the surface of the plastic part:
v
Torque driver
If you have a torque driver, refer to the
″
Torque
″
column
with each step.
v
Make sure you use the correct screw, and tighten all
screws firmly to the torque shown in the table if you
have a torque screwdriver.
Never use a screw that you
removed. Use a new one. Make sure the screws are
tightened firmly.
System board/LCD/Inverter replacement
notice
Restoring the LCD panel ID
The EEPROM on the inverter stores its supported LCD
type ID code. If you replace a LCD with one of a different
brand or use a new inverter, the ID information in the
inverter EEPROM should be updated.
Follow the steps blew to set the LCD panel ID:
1. Install the ThinkPad CE Utility Diskette and restart the
computer.
2. Select
1. LCD Panel ID Utility
from the main menu.
22
ThinkPad i Series 1200/1300 HMM