IBM ThinkPad Dock II Manual Download Page 22 | Manualshive

Page: 22 / 74

IBM ThinkPad Dock II Manual Download Page 22

Running Diagnostics

The Dock II Options Diskette helps you troubleshoot
expansion unit, SCSI adapter, and SCSI device problems
through a series of menus.

Run the diagnostics after you have completed the
installation of your Dock II and SCSI devices to verify that
these devices work correctly. Do the following:

1. Turn off the computer, the Dock II, and external SCSI

devices.

2. Insert the Option Diskette into drive A.
3. Turn on all attached external SCSI devices, the

computer, then the Dock II.

4. The Logo Screen appears.

IBM ThinkPad Dock II Option Diskette
Version 1.00

Licensed Material - Property of IBM
(C) Copyright IBM Corp. 1981, 1994
All Rights Reserved.
U.S. Government Users Restricted Rights
-Use, duplication or disclosure restricted

by GSA ADP Schedule Contact with IBM

5. After a few seconds the Main Menu appears.

Select one:

1. Test Expansion Unit
2. Test SCSI Subsystem

Main Menu

Enter F1=Help F3=Exit

6. Select a device for testing and go to the respective

section.

410

IBM Mobile Systems HMM - Volume 1

«
...
20
21
22
23
24
...
»

Summary of Contents for ThinkPad Dock II











































































Reviews:

No comments