![background image](http://html1.mh-extra.com/html/ibm/thinkpad-a22e/thinkpad-a22e_hardware-maintenance-manual_4110049020.webp)
To determine whether there are any potentially unsafe
conditions, use the following checklist at the beginning of
every service task. Begin the checks with the power off,
and the power cord disconnected.
Checklist:
1. Check exterior covers for damage (loose, broken, or
sharp edges).
2. Power-off the computer. Disconnect the power cord.
3. Check the power cord for:
a. A third-wire ground connector in good condition.
Use a meter to measure third-wire ground
continuity for 0.1 ohm or less between the external
ground pin and frame ground.
b. The power cord should be the type specified in the
parts list.
c. Insulation must not be frayed or worn.
4. Remove the cover.
5. Check for any obvious non-IBM alterations. Use good
judgment as to the safety of any non-IBM alterations.
6. Check inside the unit for any obvious unsafe
conditions, such as metal filings, contamination, water
or other liquids, or signs of fire or smoke damage.
7. Check for worn, frayed, or pinched cables.
8. Check that the power-supply cover fasteners (screws
or rivets) have not been removed or tampered with.
Handling electrostatic
discharge-sensitive devices
Any computer part containing transistors or integrated
circuits (ICs) should be considered sensitive to electrostatic
discharge (ESD). ESD damage can occur when there is a
difference in charge between objects. Protect against ESD
damage by equalizing the charge so that the machine, the
part, the work mat, and the person handling the part are all
at the same charge.
Notes
1. Use product-specific ESD procedures when they
exceed the requirements noted here.
2. Make sure that the ESD protective devices you
use have been certified (ISO 9000) as fully
effective.
When handling ESD-sensitive parts:
v
Keep the parts in protective packages until they are
inserted into the product.
v
Avoid contact with other people.
v
Wear a grounded wrist strap against your skin to
eliminate static on your body.
Safety information
16
ThinkPad A21e, A22e, i 1800 (MT 2655/2663/2664)
Summary of Contents for ThinkPad A22e
Page 24: ...Laser compliance statement 20 ThinkPad A21e A22e i 1800 MT 2655 2663 2664 ...
Page 72: ...6 5 4 4 6 5 7 6 Removing and replacing a FRU 68 ThinkPad A21e A22e i 1800 MT 2655 2663 2664 ...
Page 113: ...4 3 Removing and replacing a FRU ThinkPad A21e A22e i 1800 109 ...
Page 142: ... Part Number 24P2910 Printed in U S A 1P P N 24P2910 ...