IBM ThinkPad 770, Supplementary Manual

Page: 11 / 30

Windows 95 and Windows NT 4.0
Notes:
1. The LED might not go on or you might not hear a beep or see a
message when a device is hot or warm plugged or unplugged
under OS/2 or Windows NT 3.51.
2. Hot- or warm-plugging or unplugging of an IDE device (CD-ROM
drive or DVD drive) is not supported in 2-channel IDE mode.
Battery Diskette
Drive
HDD CD-ROM
Drive
DVD
Drive
Hot
plug
or
unplug Yes Yes No Yes Yes
Warm
plug
or
unplug Yes Yes No Yes Yes
Device Restrictions
The restrictions on some of the devices are as follows:
1. For the Diskette Drive:
You cannot hot-plug or unplug the diskette drive in the UltraBay
when drive A is assigned to the external diskette drive. The
external diskette drive is the drive that is connected to the
system's or to the SelectaBase 770 Port Replicator's external
drive port, or the one installed in the docking station.
This applies to the following conditions:
Your system starts with the external diskette drive attached
and without a diskette drive in the UltraBay.
You set the FDD setting to External using PS2.EXE and start
your system without the internal drive installed (in the
UltraBay) nor the external diskette drive attached.
2. For Other IDE Devices:
HDD:
5
Title: C79DKMST CreationDate: 08/19/97 17:47:41