IBM ThinkPad 760C, Service Manual

Page: 233 / 327

What If Your Computer Does Not Work?
3
Did the
Easy-Setup menu appear on the screen?
Yes The computer has successfully completed the POST
(internal tests), and the system programs have been
loaded. To start the test programs, select the Test
icon; then select the Start icon or press Enter.
Exit
Restart Start
SystemBoard Memory Display HDD-1 FDD-1
Parallel PCMCIA-1
1 1
1
PCMCIA-2 FDD-2
2
2
HDD-2
2
HDD-3
3
Serial
CD-ROM DSP
Audio Infrared
If the computer did not beep, the speaker is not
working correctly. Have the computer serviced. If
you are not sure about the beep, turn off the
computer; then turn it on again and repeat step 2
on page 215.
If you cannot go beyond the first screen, have the
computer serviced.
If an error is detected, the character X appears at
the left of the affected device, and an error code
appears below it. Record the error code and have
the computer serviced.
If the test does not find a problem but one still
exists, find the problem in the troubleshooting
charts on page 217.
No Return to step 2 on page 215 and start Easy-Setup
again. If you still cannot start Easy-Setup, find the
problem in the troubleshooting charts starting on
page 217.
216
IBM ThinkPad 760C User's Guide