1.4.5 Error Log
Use the following steps to create an error log, run the diagnostic tests,
and automatically record any error messages in an error log. This
procedure is normally used to diagnose an intermittent problem.
Note: The errors must be logged to a diskette drive or to a printer. If
recording errors on a diskette, use a copy of the Advanced
Diagnostics diskette that is not write-protected. Do not run any
diskette tests when logging to a diskette drive. Do not run a
parallel port test when logging to a printer.
Subtopics
1.4.5.1 Creating the Error Log
1.4.5.2 Starting the Test
1.4.5.3 Display the Error Log
IBM ThinkPad 500 HMM
Error Log
¦ Copyright IBM Corp. 1993
1.4.5 - 1
