IBM T220, User Manual

Page: 15 / 68

Electric current from the power cords, telephone lines and communication cables
is hazardous. To avoid shock hazard, connect and disconnect cables as shown
below when installing, moving, or opening the covers of this product or attached
devices. The power cord must be used with a properly grounded outlet. Connect
the power plugs to mains outlets located in the same panel.
Turn everything OFF.
To Connect To Disconnect
Turn everything OFF.
Attach all cables to devices.
1
Attach the signal cables to receptacles.
Attach the power cord to an outlet.
Turn the device ON.
First remove the power cord from
the outlet.
Remove signal cables from
receptacles.
Remove all cables from devices.
In the U.K., by law, the telephone
line cable must be connected after
the power cord.
1 2
In the U.K., by law, the telephone
line cable must be disconnected after
the telephone line cable.
2
DANGER
XIII