10
Driver Installation for Windows XP
This section must be completed
before continuing with the Windows
XP
Auto Setup
on page 13
On LCD monitors, unlike
CRTs, a faster refresh rate
does not improve display
quality.
IBM recommends using either
1024 x 768 at a refresh rate of
60Hz or 640 x 480 at a refresh
rate of 60Hz.
To use the Plug and Play feature in Microsoft
®
Windows
®
XP files should
be loaded from the
IBM Monitor CD
.
1.
Turn off the computer and all attached devices.
2.
Ensure that the monitor is connected correctly.
3.
Turn on the monitor and then the system unit. Allow the system to
boot into Windows XP.
4. Open
the
DISPLAY PROPERTIES
window by clicking
START
,
SETTINGS
,
CONTROL PANEL
and then double-clicking the
DISPLAY
icon.
5. Click
the
SETTINGS
tab.
6. Click
the
ADVANCED
button.
7. Click
the
MONITOR
tab.
8. Click
the
PROPERTIES
button.
9. Click
the
DRIVER
tab.
10. Open the Hardware Update Wizard window by clicking on
UPDATE
DRIVER
and then Click the
NEXT
button.
11. Select the “Install from a list or Specific location (Advanced)” and
then Click the
NEXT
button.
12. Insert the Setup CD into the CD drive: and click the
HAVE DISK
button.
13. Click OK.
14. Ensure that the CD drive letter is selected.
15. Choose
IBM T115 monitor
and Click OK. The files will be copied from
the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the system.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
