IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 55 / 257

Chapter 3. Installation and Configuration
3-11
7. Slide the library chassis into the rack. Secure the front of the library to the rack
using the large black screws in the bottom holes on each front bracket
(Figure 3-11).
Figure 3-11. Securing the front of the library in the rack
8. Secure the rear of the library to the rack using a round-head screw on each rear
bracket (Figure 3-12). Tighten the other rear bracket screws to secure the library
to the rack.
Figure 3-12. Securing the rear of the library in the rack
9. Run the SAS cable, power cable, and Ethernet cable through the hook and loop
fastener strap
, leaving enough slack to reach the corresponding connectors,
then tighten the strap (Figure 3-13).
11
a29z0021
11
10
a29z0022
10 10
12