IBM System Storage TS2900, Setup, Operator, And Service Manual, Page: 56 / 257

3-12
TS2900 Tape Autoloader Setup, Operator, and Service Guide
Figure 3-13. The cables at the rear of the library
Note: For information about converting and relocating the library, see Chapter 8,
“Removal and Replacement Procedures,” on page 8-1.
Removing the Accessor Locking Screw
Important: The Accessor locking screw prevents the library Accessor from moving
during shipment and
must be removed before the library is powered
ON .
To remove the Accessor locking screw, unscrew the Accessor locking screw ( in
Figure 3-14) that is attached to a label and is fastened in place on the rear panel of the
library.
Figure 3-14. Accessor locking screw
a29z0023
12
1
a29z0102
1