IBM System Storage TS2230, Setup, Operator, And Service Manual

Page: 85 / 141

Appendix C. Ordering Optional Features, Replacement Parts,
Power Cords, and Media
For ordering information, please refer to the following sections:
v
“Optional Features”
v “Replacement Parts”
v
“Power Cords”
v
“Media Supplies” on page C-4
v “Bar Code Labels” on page C-5
Optional Features
Table C-1. Optional Features
Feature Code Description
5402 2.0 m SAS/Mini-SAS 1x Cable
5502 2.0 m Mini-SAS/Mini-SAS 1x Cable
Replacement Parts
Table C-2. Replacement Parts
Part Number Description
46C2398 TS2230 (3580-H3V) Half High SAS Bridgebox CRU
95P4587 2 m SAS/Mini-SAS 1x Cable
95P4488 2 m Mini-SAS/Mini-SAS 1x Cable
95P6566 SAS wrap tool
Power Cords
To avoid electrical shock, a power cord with a grounded attachment
plug has been provided. Use only properly grounded outlets.
The table below lists the power cord part number, feature code, the
country or region where the power cord can be used, and the plug's
standard reference. The last column in the table contains an index
number that you can match to a specific receptacle type in Figure C-1 on
page C-4.
All power cords use an appliance coupler that complies with the
International Electrotechnical Commission (IEC) Standard 320, Sheet
C13.
If the power cord that you receive does not match your receptacle,
contact your local dealer.
Power cords used in the United States and Canada are listed by
Underwriter's Laboratories (UL), are certified by the Canadian Standards
Association (CSA), and comply with the plug standards of the National
Electrical Manufacturers Association (NEMA). For other worldwide
geographies, plug standards are listed in the table below.
© Copyright IBM Corp. 2010
C-1