IBM System Storage DS3000, Programming Manual

Page: 174 / 652

Parameters
Parameter Description
allenclosures
This parameter downloads new power supplyfirmware to all
of the enclosures in the storage subsystem.
enclosure or enclosures
The enclosure that contains the power supply to which you
want to download new firmware. Enclosure ID values are
0
to
99
. Enclose the enclosure ID value in square brackets ([ ]).
powerSupplyUpdate file
The file path and the file name of the file that contains the
firmware image. Enclose the file path and the file name of
the firmware image in double quotation marks (" "). For
example: file=
"C:\Program Files\CLI\dnld\esmfrm.esm" .
Valid file names have an .esm extension.
powerSupplyUnit
The power supply to which you want to download new
firmware. Valid power supply identifiers are
left , right ,
top
, or
bottom
. Enclose the power-fan CRU/FRU identifier in
square brackets ([ ])
forceUpdate
This parameter bypasses these checks:
v
To determine if the new firmware version is the same as
the existing firmware version.
v
To determine if the power supply is in an Optimal state.
v To determine if there is a redundant power supply that is
in an Optimal state.
Download Storage Subsystem Drive Firmware
This command downloads firmware images to all of the disk drives in the storage subsystem.
Syntax
download storageSubsystem driveFirmware file=” filename ”
[file=” filename2 ”... file=” filenameN ”]
Parameter
Parameter Description
file The file path and the file name of the file that contains
the firmware image. Enclose the file path and the file
name of the firmware image in double quotation marks
(“ ”).
Notes
When you run this command, you can download more than one firmware image file to the disk drives in
a storage subsystem. The number of firmware image files that you can download depends on the storage
subsystem. The storage management software returns an error if you try to download more firmware
image files than the storage subsystem can accept.
You can schedule downloads for multiple disk drives at the same time, including multiple disk drives in
a redundant subsystem. Each firmware image file contains information about the disk drive types on
which the firmware image runs. The specified firmware images can be downloaded only to a compatible
disk drive. Use the
download drive firmware
command to download a firmware image to a specific disk
drive.
3-128
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide