What to do next
Turn on the appliance and reimage the appliance.
Important:
You must reimage the appliance after you replace the drive in the appliance. If you do not
reimage the appliance, the appliance might become inoperable.
Reference:
The steps for reimaging an appliance are documented in the following guides:
v
For the IBM Security Access Manager appliance, see the Getting Started instructions on the IBM
Knowledge Center at http://www.ibm.com/support/knowledgecenter/SSPREK/welcome. To access
the Getting Started instructions for supported versions of the Access Manager appliance, select the
product of interest on the left navigation pane of the IBM Security Access Manager welcome page.
v
For the IBM Security Network Protection appliance, see the Getting Started instructions on the IBM
Knowledge Center at http://www.ibm.com/support/knowledgecenter/SSHLHV/welcome. To access
the Getting Started instructions for supported versions of the Network Protection appliance, select the
product of interest on the left navigation pane of the IBM Security Network Protection welcome page.
v
For the IBM Security SiteProtector System appliance, see the Getting Started instructions on the IBM
Knowledge Center at http://www.ibm.com/support/knowledgecenter/SSETBF/welcome. To access
the Getting Started instructions for supported versions of the SiteProtector System appliance, select the
product of interest on the left navigation pane of the IBM Security SiteProtector System welcome page.
First edition: August 2013
© Copyright IBM Corporation 2013, 2015.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.
