Procedure
Complete the following steps to replace a failed disk drive assembly:
1.
Turn off the appliance by pressing the power button on the front of the appliance.
2.
Unplug all of the power cords that are attached to the appliance.
3.
Press the release button on the left of the disk drive assembly to release the assembly lock.
4.
Pull the drive handle lever to the right to pull the disk drive assembly from the drive bay, as shown
in Figure 2.
5.
Place the new disk drive assembly in the drive bay.
6.
Push the disk drive assembly into the drive bay until the lever locks into place.
Figure 2. Removing the disk drive assembly from the drive bay
2
