IBM ServeRAID-MR10is, User Manual

Page: 70 / 94

6-4 Using the Intelligent Battery Backup Unit
5. Click the word Present in the Battery Backup field.
The Battery Module screen appears, as shown in Figure 6.3 . This
screen contains the following information:
– Battery information
– Design information
– Capacity information
– Auto Learn properties
Figure 6.3 Battery Module Screen
Most of the Battery Module properties are view-only and are self-
explanatory.
In the lower right corner of the screen are the Auto Learn options. A
learning cycle is a battery calibration operation performed by the
controller periodically to determine the condition of the battery. You
can change the learn delay interval and the auto learn mode.
Note: LSI recommends leaving the the learn delay interval and
the auto learn mode at their default settings.