- 18 -
ServeRAID M5210 SAS/SATA Controller for IBM System x User’s Guide
July 2014
Chapter 2: ServeRAID M5210 SAS/SATA Controller for IBM System x User’s Guide
After Installing the Controller
Figure 2 Connecting a ServeRAID M5210 Controller Internal Connector to a Drive Backplane
7.
Replace the server cover.
8.
Slide the server into the rack.
9.
Reconnect the power cords and any cables that you removed.
10. Turn on the peripheral devices and the server.
2.4
After Installing the Controller
After you install the controller, you must configure it and install the operating system device driver. The ServeRAID-M
Software User’s Guide instructs you on the configuration options and how to set them on your controller. The
ServeRAID-M Device Driver Installation User’s Guide provides detailed installation instructions for operating system
device drivers.
32-Bit Slots
(3.3 V Only)
PCI Express
x8 Slot
Bracket
Screw
3_01856-00
Press
Here
SFF-8643
Mini-SAS HD
Connector
Press
Here
