20
ServeRAID™-4x Ultra160 SCSI Controller Device Driver Installation Instructions
Installing an HBA diskette file using Pkgadd
1.
Insert the
IBM ServeRAID Device Drivers for SCO Operating Systems - UnixWare
HBA and OpenServer BTLD
diskette into the diskette drive.
2.
Type:
pkgadd d /dev/dsk/f0t
3.
Press Enter.
4.
When the message
Insert diskette into Floppy Drive 1
appears, press Enter.
5.
When the message
Installation of IBM ServeRAID SCSI IHV HBA (ips)
was successful
appears, type:
q
6.
Press Enter.
7.
After the device driver is installed, shut down and restart the server.
Installing an HBA diskette file using SCOAdmin
1.
Insert the
IBM ServeRAID Device Drivers for SCO Operating Systems - UnixWare
HBA and OpenServer BTLD
diskette into the diskette drive.
2.
Start the SCOAdmin utility program by typing
SCOADMIN
at the system prompt.
3.
Click Software_Management.
4.
Click Application Installer.
5.
Click the Install From tab.
6.
Click Disk_A.
7.
Click Update View if nothing appears in the window.
8.
When the icon labeled ips appears in the window, click Install.
9.
After the device driver is installed, remove the diskette from the diskette drive;
then, shut down and restart the server.
