5. Wash the ball in warm, soapy water; then
dry it with a clean cloth. Blow carefully
into the ball-cage
4
to dislodge dust and
lint.
6. Look for a build-up of dirt on the plastic
rollers
3
inside the ball-cage. This
build-up usually appears as a stripe running
around the middle of the rollers.
7. If dirty, clean the rollers by using a cotton
swab soaked in isopropyl (rubbing) alcohol.
Turn the rollers with your finger and repeat
the process until all deposits are removed.
After cleaning, make sure the rollers are still
centered in their channels.
8. Make sure that fluff from the swab is not
left on the rollers.
9. Replace the ball and retainer ring. Lock the
retainer in place by turning it in the opposite
direction of the arrows.
10. Connect the mouse cable to the computer.
Turn your computer back on.
2-2 ScrollPoint Mouse
Summary of Contents for ScrollPoint
