IBM SC41-5420-04, Tcp/Ip Configuration And Reference

Page: 71 / 116

Note: The maximum number of interfaces that can be active on a line description
at any given time is 128. This is true for all line types (for example,
token-ring, Ethernet, frame relay, and so forth).
Example: A Single Host on a Network over a Communications
Line
Your server uses one adapter for TCP/IP to attach to a LAN or WAN network. You
add one TCP/IP interface. This TCP/IP interface includes the Internet address of
your server. With this single Internet address, your server is part of a single
TCP/IP network (Figure 47).
Example: Multiple Hosts on the Same Network over the Same
Communications Line
Your server uses one adapter for TCP/IP to attach to a LAN or WAN network. You
add multiple TCP/IP interfaces. Each of these TCP/IP interfaces includes an
Internet address of the same TCP/IP network. With these multiple Internet
addresses your server appears as multiple hosts in a single TCP/IP network
(Figure 48).
This can be a migration scenario.
Example: Multiple Hosts on the Same Network over Multiple
Communications Lines
Your server uses more than one adapter for TCP/IP to attach to the same LAN or
WAN network. You add multiple TCP/IP interfaces. At least one interface is
assigned to each adapter/line description. Each of these TCP/IP interfaces includes
an Internet address of the same TCP/IP networks. With these multiple Internet
Figure 47. Multihoming - Single Host, Single Network, Single Line
Figure 48. Multihoming - Multiple Hosts, Single Network, Single Line
Chapter 2. TCP/IP: Operation, Management, and Advanced Topics
57