IBM SAN42B-R, Installation, Service And User Manual

Page: 53 / 96

5. Repeat steps 1-4 for the remaining SFP+ and QSFP transceivers and cables.
Verifying correct operation and backing up the configuration
Complete the following steps to verify correct operation and back up the switch
configuration.
1. Check the LEDs to verify that all components are functional. For information
about LED patterns, refer to “Interpreting LED activity” on page 33.
2. Enter the portcfgpersistentenable command to activate the FC ports for FC
operation.
3. Verify the correct operation of the switch by entering the
switchShow
command
from the workstation. This command provides information about switch and
port status, as shown in the example output below.
sb_70:admin> switchshow
switchName: sb_70
switchType: 148.0
switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 70
switchId: fffc46
switchWwn: 10:00:00:05:1e:65:79:04
zoning: ON (PERF_CFG)
switchBeacon: OFF
FC Router: OFF
Allow XISL Use: OFF
LS Attributes: [FID: 128, Base Switch: No, Default Switch: Yes, Address Mode 0]
Index Port Address Media Speed State Proto
==================================================
0 0 460000 id N16 Online FC F-Port 20:05:00:11:0d:a8:01:00
1 1 460100 id N16 Online FC F-Port 20:01:00:11:0d:bb:01:00
2 2 460200 id N16 Online FC F-Port 20:03:00:11:0d:84:01:00
3 3 460300 id N16 Online FC F-Port 20:07:00:11:0d:26:01:00
4 4 460400 id N16 Online FC F-Port 10:00:8c:7c:ff:5c:c5:01
5 5 460500 id N16 Online FC F-Port 10:00:8c:7c:ff:58:4c:00
6 6 460600 id N16 Online FC F-Port 10:00:8c:7c:ff:5c:c9:01
7 7 460700 id N16 Online FC F-Port 10:00:8c:7c:ff:5c:bd:00
8 8 460800 -- N16 No_Module FC
9 9 460900 -- N16 No_Module FC
10 10 460a00 -- N16 No_Module FC
11 11 460b00 -- N16 No_Module FC
12 12 460c00 -- N16 No_Module FC
13 13 460d00 -- N16 No_Module FC
14 14 460e00 -- N16 No_Module FC
15 15 460f00 -- N16 No_Module FC
16 16 461000 -- N16 No_Module FC
17 17 461100 -- N16 No_Module FC
18 18 461200 -- N16 No_Module FC
!
b48f012
Figure 18. Installing a 16 Gbps SFP+ with pull tab (shown without cable attached for clarity)
Chapter 2. Installing and configuring the switch
29