IBM SAN40B-4 - System Storage Switch, User & Service Manual

Page: 21 / 79

About this document
This document is intended for use by systems administrators and technicians
experienced with networking, Fibre Channel, and storage area network (SAN)
technologies. It describes how to install, service, and use the IBM System Storage
™
SAN40B-4 (2498 Models 40B and E40). Throughout this document, the product is
referred to as the SAN40B-4 , or simply the switch to apply to both models.
This document has been created to include information specific to SAN40B-4
switches running on Fabric OS version 6.1.0. This document does not support all
Fabric OS versions. It is specific to Fabric OS v6.1.0 or later. To obtain information
about a Fabric OS version other than v6.1.0, refer to the documentation specific to
your Fabric OS version.
The sections that follow provide information about:
v
“Product documents”
v “Brocade documents”
v
“Getting help” on page xx
v “How to send your comments” on page xxi
Product documents
The following documents contain information related to this product:
v
IBM System Storage SAN40B-4 Installation, Service, and User’s Guide ,
GA32-0581 (this document)
v IBM System Storage SAN40B-4 Quick Start Guide , GA32-0586
v
IBM Systems Safety Notices , G229–9054
v IBM System Storage SAN 2498 Statement of Limited Warranty , GA32-0584
Brocade documents
IBM b-type switches use software licensed from Brocade Communications Systems,
Inc. You can find information related to the software that supports the director in the
following documents on the CD-ROM supplied with this product:
Brocade Fabric OS
v
Fabric OS Administrator’s Guide
v Fabric OS Command Reference Manual
v
Fabric OS MIB Reference Manual
v Fabric OS Message Reference Manual
v
Fabric OS Troubleshooting and Diagnostics Guide
v Access Gateway Administrator's Guide
v EZSwitchSetup Administrator's Guide
v SAN Glossary
Brocade Fabric OS optional features
v Fabric Watch Administrator’s Guide
v
Web Tools Administrator’s Guide
© Copyright IBM Corp. 2008
xix