IBM SAN256B-6, Installation, Service And User Manual

Page: 35 / 292

Preparing for the Installation
This topic provides the following information:
v “Safety precautions”
v “Facility requirements” on page 9
v “Time and items required for installation” on page 10
v “Quick installation checklists” on page 11
v “Items shipped” on page 14
Safety precautions
When using this product, observe all danger, caution, and attention notices in this manual. The safety
notices are accompanied by symbols that represent the severity of the safety condition.
Refer to the Cautions and Danger Notices at the end of this guide for translations of safety notices for
this product.
General precautions
DANGER
The procedures in this manual are for qualified service personnel.
DANGER
Before beginning the installation, see the precautions in “Power precautions.”
CAUTION:
Changes or modifications made to this device that are not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
CAUTION:
Disassembling any part of the power supply and fan assembly voids the warranty and
regulatory certifications. There are no user-serviceable parts inside the power supply and
fan assembly.
CAUTION:
Make sure the airflow around the front, sides, and back of the device is not restricted.
CAUTION:
To protect the serial port from damage, keep the cover on the port when not in use.
CAUTION:
Never leave tools inside the chassis.
© Copyright IBM Corp. 2018
7