![background image](http://html1.mh-extra.com/html/ibm/san-volume-controller-2145-cg8/san-volume-controller-2145-cg8_hardware-maintenance-manual_4016998283.webp)
9.
Push the heat-sink release lever (
2
) down and away from the processor, then lift the lever until it
is perpendicular to the system board.
10.
Lift the heat sink from the side nearest the lever, in its upright position and remove. After removal,
place the heat sink on its side on a clean, flat surface.
11.
Release the microprocessor-release lever (
2
in Figure 251), by pressing down on the curved end of
the lever, moving that end away from the middle of the processor, and releasing the lever up to the
open position.
1
Microprocessor
2
Microprocessor-release lever
3
Microprocessor-bracket frame
12.
Open the microprocessor-bracket frame by lifting the tab that is on the top edge. Keep the bracket
frame in the open position, as shown in Figure 251.
13.
Locate the microprocessor installation tool that comes with the new microprocessor.
14.
Align the microprocessor installation tool with the screws on the microprocessor bracket and attach
the tool to the microprocessor.
Align the holes on the installation tool with the screws on the microprocessor bracket, then place the
microprocessor installation tool down over the microprocessor.
Twist the handle clockwise to attach the tool to the microprocessor.
You can pick up or release the microprocessor by twisting the microprocessor installation tool
handle.
1
2
3
Figure 251. Opening the SAN Volume Controller 2145-CG8 or 2145-CF8 microprocessor-bracket frame
Chapter 2. Removing and replacing parts
253
|
|
|
|
|
|
|
|
|
Summary of Contents for SAN Volume Controller 2145-CG8
