IBM RackSwitch G8264T, Installation Manual, Page: 36 / 64

22
RackSwitch G8264T: Installation Guide
Installing the RackSwitch G8264T in an IBM iDataPlex rack
This section describes how to install the RackSwitch G8264T in an IBM iDataPlex
rack. The iDataPlex mounting kit allows the switch to be mounted either vertically or
horizontally. For information about mounting the G8264T in other rack types, see
the following sections:
•
“Installing the RackSwitch G8264T in a standard equipment rack” on page 20
• “Installing the RackSwitch G8264T in an IBM System x rack” on page 25
The IBM iDataPlex rack mount kit must be purchased separately. The following
table lists the parts included in the iDataPlex mounting kit.
Table 11. iDataPlex rack mount kit parts
Item number Description Quantity
1 Label 1
2 M6 locking washer 8
3 M6 screws 8
4 M6 clip nuts 8
5 M4 screws 16
6 Switch rear bracket 2
7 Switch front bracket 2
8 Rear mounting bracket 2