3.0 System Memory Requirements
The Model N51 has a minimum of 2MB of memory installed on the system board
at the time of shipment. One additional memory-module kit, 2MB, 4MB, or
8MB, can be installed into the memory module connector on the system
board. The maximum system-board memory capacity is 10MB.
If a memory error occurs, the Model N51 relocates system-board memory in
1MB blocks. If the POST detects a memory error in the first 640KB of
system-board memory, the entire 1MB of memory is deactivated and an error
code is displayed.
Note: Customer diagnostics is capable of logically eliminating defective
memory so that no memory error code appears at power-on reset.
After replacing a defective memory module kit, or whenever memory is added
or removed from the system, run the 5. Automatic configuration to store
the new system configuration.
Note: If you configure the system using the 4. Set configuration from the
Reference Diskette, make sure the languages of the Reference
Diskette and the system must match.
IBM PS/2 Model N51 SX HMR
System Memory Requirements
¦ Copyright IBM Corp. 1991
3.0 - 1