1.1.2 Power check 0110
Note: If you change the card tray assembly or the Integrated Tube
Component (ITC), you must then check all the adjustments for the display.
+---+
¦001¦
+---+
- Remove the power cord from the power outlet, and then from the display.
- Set the power switch to On and to Off several times.
DOES THE POWER SWITCH OPERATE NORMALLY?
Yes No
¦ ¦
¦ ¦
¦ +---+
¦ ¦002¦
¦ +---+
¦
¦ Install new card tray assembly.
¦
¦
+---+
¦003¦
+---+
- Set the power switch to Off.
- Connect a power cord (that is known to be good) to the display and then
to the electrical power outlet.
- Set the power switch to On.
IS THE POWER LED ON?
Yes No
¦ ¦
¦ ¦
¦ +---+
¦ ¦004¦
¦ +---+
¦
¦ Install new card tray assembly.
¦
¦
+---+
¦005¦
+---+
Continue with Self-Test.
--------------------------------------------------------------------------
IBM PS/2 8511 and 8518 Color Displays HMS
Power check 0110
¦ Copyright IBM Corp. 1992.
1.1.2 - 1