IBM PS/2 25 SX Hardware Maintenance Reference Download Page 12 | Manualshive

Page: 12 / 37

IBM PS/2 25 SX Hardware Maintenance Reference Download Page 12

3.0 Power Supply Voltages

If the power-on indicator is not on, or if the power-supply fan is not

running, check the power cord for proper installation and continuity.

Verify that the voltage-selector switch is set for the correct voltage.

If these are correct, check the voltages listed in the following figures.

PICTURE 2

+------------------------------------------------------------------------+

¦ Vdc Minimum ¦ Vdc Maximum ¦ --Lead ¦ +Lead Pin ¦

¦ ¦ ¦ Pin ¦ ¦

+-----------------+------------------+-----------------+-----------------¦

¦ + 4.8 ¦ + 5.2 ¦ P6-5 ¦ P6-1 ¦

+-----------------+------------------+-----------------+-----------------¦

¦ + 4.8 ¦ + 5.2 ¦ P6-5 ¦ P6-10 ¦

+-----------------+------------------+-----------------+-----------------¦

¦ + 4.5 ¦ + 5.4 ¦ P6-9 ¦ P6-5 ¦

+-----------------+------------------+-----------------+-----------------¦

¦ +11.5 ¦ +12.6 ¦ P6-5 ¦ P6-3 ¦

+-----------------+------------------+-----------------+-----------------¦

¦ +10.8 ¦ +12.9 ¦ P6-4 ¦ P6-8 ¦

+-----------------+------------------+-----------------+-----------------¦

¦ ¦ ¦ ¦ ¦

+------------------------------------------------------------------------+

If the voltages are not correct, check the power cord for continuity. If

the power cord is good, replace the display assembly.

IBM PS/2 Model 25 SX HMR

Power Supply Voltages

¦ Copyright IBM Corp. 1992

3.0 - 1

«
...
10
11
12
13
14
...
»

Summary of Contents for PS/2 25 SX






































Reviews:

No comments