IBM Proventia Management SiteProtector SP1001, Hardware Configuration Manual

Page: 51 / 64

Scheduling a server shut down or restart
Procedure
1.
Select the System view.
2. In the left pane, expand the Site Node for the SiteProtector SP1001 appliance
Site, and then click the
Appliance icon. The Appliance Configuration interface
appears in the right pane.
3. Select the Maintenance tab, and then click Shutdown .
4. Select one of the following options:
Click this option... To do the following...
Restart scheduled Schedule the SiteProtector SP1001 appliance
to restart
Shutdown scheduled Schedule the SiteProtector SP1001 appliance
to shut down, and then turn off
5. Select either the elapsed time option or the day and time option, and then
enter the desired values.
6. If you want to warn users before the shut down occurs, select the Send
warning message to computers currently connected to this server check box.
7. Click OK .
Configuring SNMP Services
About this task
By default, the Simple Network Management Protocol (SNMP) service is disabled
on the SiteProtector SP1001 appliance but allowed by the Proventia Server IPS
policy. If your SiteProtector SP1001 appliance must be monitored by SNMP, you
can enable SNMP services on the Network tab.
SNMP is a network management protocol frequently used in TCP/IP networks to
monitor and manage computers and other devices (such as printers) connected to
the network.
Procedure
1.
Select the System view.
2. In the left pane, expand the Site Node for the SiteProtector SP1001 appliance
Site, and then click the
Appliance icon.
3. The Appliance Configuration interface appears in the right pane.
4. Select the Network tab, and then click SNMP Service .
5. Do one of the following:
v To enable SNMP services, select the SNMP Service Enabled check box.
v
To disable SNMP services, clear the SNMP Service Enabled check box.
6.
Click
OK
.
Chapter 5. Optional Configuration Tasks
27