devices. For information about operating system and partition requirements, see one of the following
topics:
• The latest version of enabling libraries and utilities can be downloaded from Fix Central (http://
www.ibm.com/support/fixcentral/).
• Power Systems Prerequisites (http://www14.software.ibm.com/support/customercare/iprt/home).
• IBM SSIC (System Storage Interoperation Center) (http://www-03.ibm.com/systems/support/storage/
ssic/interoperability.wss).
• The latest version of the device driver or IBM Power RAID adapter utilities (iprutils) can be downloaded
from the IBM Service and Productivity Tools website (http://www14.software.ibm.com/webapp/
set2/sas/f/lopdiags/home.html).
• For support details, see the Linux Alert website (http://www14.software.ibm.com/webapp/set2/sas/f/
lopdiags/info/LinuxAlerts.html).
PCIe3 LP 4-port (10 Gb FCoE and 1 GbE) copper and RJ45 adapter (FC EL3C or FC EN0L; CCIN 2CC1)
Learn about the specifications and operating system requirements for the feature code (FC) EL3C or FC
EN0L adapter.
Overview
The PCIe3 LP 4-port (10 Gb FCoE and 1 GbE) copper and RJ45 adapter is a PCI Express (PCIe) generation
3, low-profile adapter. The adapter has four-ports and is a Fibre Channel over Ethernet (FCoE) converged
network adapter (CNA). This adapter provides a PCIe 3.0 host bus interface. The adapter is a high-
performance adapter that consolidates traffic for networking and Fibre Channel storage. The adapter is
optimized for cloud computing, virtualization, storage, and other data center applications. Both the FCoE
and network interface controller (NIC) functions are available for all the four ports. Use of the FCoE
requires that you use convergence enhanced Ethernet (CEE) switches. The link aggregation and failover
features of the adapter make it suitable for critical network applications that require redundancy and high
availability.
Important: There is no FCoE support on POWER9 systems.
The four-port adapter provides two 10 Gb FCoE Copper Twin-axial ports and two 1 Gb RJ45 Ethernet
ports. The two 10 Gb FCoE ports are connected by little connector-type (LC) connectors. Each FCoE port
provides Ethernet connectivity with a nominal data rate of 10 Gbps (gigabits per second). Each of the 1 Gb
ports provides Ethernet connectivity at a data rate of 1 Gbps and is connected with Ethernet cables. A 10
Mb data rate is not supported. Figure 68 on page 189 shows the FC EN0L adapter.
Restriction: The 1 Gb Ethernet ports do not support data rates of 10 Mbps (megabits per second).
The adapter provides the following features:
• The adapter supports all Fibre Channel and Ethernet topologies.
• The 10 Gb SFP+ ports can function in the NIC or FCoE mode.
• The adapter supports the SR-IOV (Single Root I/O Virtualization) NIC capability.
• The adapter can function as a Boot adapter.
188 Power Systems: Managing PCIe adapters
Summary of Contents for Power Systems Series
