IBM Power System POWER7 Series, Common Service Procedures

Page: 173 / 198

5. From the list of serviceable events recorded in step 4 on page 158, complete the following steps 6 -
step 32 on page 161 for each open service action event.
6.
Determine the error class of the serviceable event. Record for future use.
7. Examine the details of the open service action event.
Is the error code that is associated with this service action event the same as recorded in step 1 on page 158?
v
Yes: Go to step 11.
v
No: Continue with the next step.
8.
Examine the FRU list of the service action event. Are any FRUs listed for the service action event?
v
Yes: Continue with the next step.
v
No: Go to step 11.
9. Is the FRU list identical that is, the same FRUs, same number of FRUs, and same order of FRUs) to
the FRU list of the error code recorded in step 1 on page 158?
v
Yes: Go to step 11.
v
No: Continue with the next step.
10. The FRU list is different. Is the FRU you replaced and recorded in step 1 on page 158 in the list of
FRUs for this service action event?
v
Yes: Continue with the next step.
v
No: Go to step 32 on page 161.
Note: Some service action events will remain open when you leave this MAP. Further service actions might be
required to complete the repair.
11.
Examine the details of this service action event, and record the partitions involved in this service
action event for use in a later step.
12. Is the error code associated with this service action event of the form A11-xxx or A01-xxx?
v
Yes: Continue with the next step.
v
No: Go to step 17 on page 160.
13. Have you begun a list of A xx partitions from prior service action events that you processed in this
MAP?
v
Yes: Go to step 15 on page 160.
v
No: Continue with the next step.
14. Begin a new list of A xx partitions by copying the list of partitions obtained in step 11. Go to step 16
on page 160.
Common service procedures
159