IBM Power System 8335-GTC, Manual

Page: 22 / 46

FQPSPCR0030F
Explanation: Message: An invalid argument was
provided to a command
Severity: Warning
Serviceable: No
Call Home Candidate: No
Affected Subsystem: Systems Management - Core /
Virtual Appliance
Event type: Firmware/Software Failure
Response: If this is a persistent issue, flash or update
the BMC firmware. If the problem still persists, contact
your next level of support. For information about
updating system firmware, see Getting fixes. For
information on how to contact support, see Contacting
IBM service and support.
FQPSPDM0001M
Explanation: Message: There is no more space
available for dump files. Please delete some.
Severity: Critical
Serviceable: Yes
Call Home Candidate: No
Affected Subsystem: Systems Management - Data
Management
Event type: Firmware/Software Failure
Response: Clear some of the BMC dumps as the BMC
storage space is full. This can be accomplished using
the OpenBMC tool as follows:
openbmctool -U
<username> -P <password> -H <BMC host name or BMC
IP> dump delete <number of dump or keyword "all">
FQPSPEM0003G
Explanation: Message: Failed to find an alert in the
CSM RAS event types table
Severity: Warning
Serviceable: Yes
Call Home Candidate: No
Affected Subsystem: Systems Management - Events /
Monitoring
Event type: Firmware/Software Failure
Response: Contact your next level of service, see
Contacting IBM service and support.
FQPSPIN0000M
Explanation: Message: Connection timed out. Ensure
you have network connectivity to the BMC.
Severity: Critical
Serviceable: Yes
Call Home Candidate: No
Affected Subsystem: Interconnect Networking
Event type: Communication Failure/Timeout
Response: Verify network connectivity between the
two systems and the bmc is functional.
FQPSPIN0001M
Explanation: Message: Connection Error. View
additional details for more information
Severity: Critical
Serviceable: Yes
Call Home Candidate: No
Affected Subsystem: Interconnect Networking
Event type: Communication Failure/Timeout
Response: Correct the issue highlighted in additional
details and try again.
FQPSPMA0043M
Explanation: Message: An error occurred with a
memory DIMM and automated isolation was not
possible
Severity: Critical
Serviceable: Yes
Call Home Candidate: No
Affected Subsystem: Memory
Event type: Unrecoverable Hardware Failure
Response: Search for a FQPSPMA0007I event. If you
find one of these events, replace the DIMM indicated in
the event. If it is DIMM1, replace DIMM1 and so on. If
the replacement of the DIMM does not resolve the
problem, replace the system backplane. To identify the
physical location and removal and replacement
procedure, see 8335-GTC, 8335-GTG, 8335-GTH,
8335-GTW, or 8335-GTX locations. If you did not find
one of these events, or if you found one of these events
but the replacement of hardware did not resolve the
problem, go to Contacting IBM service and support.
FQPSPMA0044M
Explanation: Message: A memory configuration error
has been detected.
Severity: Critical
Serviceable: Yes
Call Home Candidate: No
Affected Subsystem: Memory
Event type: Unrecoverable Hardware Failure
Response: Ensure all DIMMs are properly seated and
you are following the DIMM plugging rules. See
Memory plugging rules in the 8335-GTC, 8335-GTG,
8335-GTH, 8335-GTW, or 8335-GTX system.
FQPSPMA0045M
Explanation: Message: An uncorrectable memory
problem occurred.
Severity: Critical
Serviceable: Yes
Call Home Candidate: Yes
Affected Subsystem: Memory
Event type: Unrecoverable Hardware Failure
Response: Look for system events that are related to
memory and occurred around the same time as the
FQPSPCR0030F • FQPSPMA0045M
6
Event Codes for the 8335-GTC, 8335-GTG, 8335-GTH, 8335-GTW, and 8335-GTX