IBM Power System 5888 Service Information Download | Manualshive

Page: 61 / 66

background image

any radio or television interference caused by unauthorized changes or modifications to this equipment.
Unauthorized changes or modifications could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

Industry Canada Compliance Statement

This Class B digital apparatus complies with Canadian ICES-003.

Avis de conformité à la réglementation d'Industrie Canada

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

European Community Compliance Statement

This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on
the approximation of the laws of the Member States relating to electromagnetic compatibility. IBM cannot
accept responsibility for any failure to satisfy the protection requirements resulting from a
non-recommended modification of the product, including the fitting of non-IBM option cards.

This product has been tested and found to comply with the limits for Class B Information Technology
Equipment according to European Standard EN 55022. The limits for Class B equipment were derived for
typical residential environments to provide reasonable protection against interference with licensed
communication equipment.

European Community contact:
IBM Deutschland GmbH
Technical Regulations, Department M372
IBM-Allee 1, 71139 Ehningen, Germany
Tele: +49 7032 15 2941
email: [email protected]

VCCI Statement - Japan

Japanese Electronics and Information Technology Industries Association (JEITA)
Confirmed Harmonics Guideline (products less than or equal to 20 A per phase)

Notices

49

«
...
59
60
61
62
63
...
»

Summary of Contents for Power System 5888



































































Reviews:

No comments

Related manuals for Power System 5888

Brand: CalDigit Pages: 20

Brand: Calix Pages: 108

Brand: Eaton Pages: 4

Brand: SilentiumPC Pages: 2

Brand: InWin Pages: 16

Brand: Aukey Pages: 18

Brand: Diablotek Pages: 1

Modular Removable Motherboard Tray

Brand: Mountain Mods Pages: 5

MobileStor MS4UM

Brand: Sans Digital Pages: 9

Deep Silence 5 Rev. B

Brand: Nanoxia Pages: 18

Brand: Raidon Pages: 2

Brand: Aerocool Pages: 2

Brand: X-media Pages: 7

Brand: SilverStone Pages: 2

Brand: SilverStone Pages: 4

Brand: SilverStone Pages: 28

Forensic FRTX400H-FJ

Brand: WiebeTech Pages: 5

Forensic FRTX400-FJ

Brand: WiebeTech Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands