IBM PCI Dual Channel Ultra2 SCSI Adapter, Installation And User Manual

Page: 29 / 50

Chapter 5. Installing Hardware
This section provides the guidance necessary to install a PCI adapter. Before you
begin, be sure you have read “Handling Static Sensitive Devices” on page vii. Also
refer to the
PCI Adapter Placement Reference guide.
Attention: Do not remove the PCI Dual Channel Ultra2 SCSI Adapter from its
anti-static package at this time.
Installing the Adapter
1. Be sure you have read Chapter 2, “Preparing for Installation” on page 2-1.
Ÿ
Determine if you should install your adapter hardware first.
Ÿ
Determine if you should install your device driver software first.
Ÿ
If you should install your adapter hardware first, go to step 2 and continue
with this section.
Ÿ
If you should install your device driver software first, go back to Chapter 3,
“Installing Device Driver Software” on page 3-1. Return here to install your
hardware.
2. Determine if you are installing your adapter for internal or external connection:
Ÿ
For external connections, refer to your system unit User's guide for PCI
adapter installation instructions. Reinstall the covers once the installation is
complete. Return here and go to “Connecting Internal or External Devices”
on page 5-2.
Ÿ
For internal connections, refer to your system unit User's guide for PCI
adapter installation instructions. Do not reinstall the covers once the
installation is complete. Return here and go to “Connecting Internal or
External Devices” on page 5-2.
Chapter 5. Installing Hardware
5-1