IBM PC 300PL Types 6862, Installation Manual

Page: 94 / 112

Starting the Configuration/Setup Utility Program
When you restart the computer for the first time after working with most options, a
message appears indicating that a configuration change has occurred. You are then
prompted to enter the Configuration/Setup Utility program to manually update the
configuration settings or to confirm and save the settings that were automatically
updated by the system programs.
After you change an option and restart the computer, the following screen might
appear.
Note: Depending on the configuration changes that occurred, the error message
you see might be different from the one shown here.
If the preceding screen appears, select Continue until you reach the
Configuration/Setup Utility menu and then go to “Changing Settings and Exiting”
on page 82.
If the preceding screen does not appear, use the following procedures to access the
Configuration/Setup Utility menu.
POST Startup Error(s)
The following error(s) were detected when the system was
started:
162 Configuration Change Has Occurred
Select one of the following:
Continue
Exit Setup
80
Installing Options in Your Personal Computer